ssh: The authenticity of host 'hostname' can't be established

When i ssh to a machine, sometime i get this error warning and it prompts to say "yes" or "no". This cause some trouble when running from scripts that automatically ssh to other machines.

Warning Message:

The authenticity of host '<host>' can't be established.
ECDSA key fingerprint is    SHA256:TER0dEslggzS/BROmiE/s70WqcYy6bk52fs+MLTIptM.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added 'pc' (ECDSA) to the list of known hosts.

Is there a way to automatically say "yes" or ignore this?

Depending on your ssh client, you can set the StrictHostKeyChecking option to no on the command line, and/or send the key to a null known_hosts file. You can also set these options in your config file, either for all hosts or for a given set of IP addresses or host names.

ssh -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no

EDIT

As @IanDunn notes, there are security risks to doing this. If the resource you're connecting to has been spoofed by an attacker, they could potentially replay the destination server's challenge back to you, fooling you into thinking that you're connecting to the remote resource while in fact they are connecting to that resource with your credentials. You should carefully consider whether that's an appropriate risk to take on before altering your connection mechanism to skip HostKeyChecking.

Reference.

Old question that deserves a better answer.

You can prevent interactive prompt without disabling StrictHostKeyChecking (which is insecure).

Incorporate the following logic into your script:

if [ -z "$(ssh-keygen -F $IP)" ]; then
  ssh-keyscan -H $IP >> ~/.ssh/known_hosts
fi

It checks if public key of the server is in known_hosts. If not, it requests public key from the server and adds it to known_hosts.

In this way you are exposed to Man-In-The-Middle attack only once, which may be mitigated by:

• ensuring that the script connects first time over a secure channel
• inspecting logs or known_hosts to check fingerprints manually (to be done only once)

To disable (or control disabling), add the following lines to the beginning of /etc/ssh/ssh_config...

Host 192.168.0.*
   StrictHostKeyChecking=no
   UserKnownHostsFile=/dev/null

Options:

• The Host subnet can be * to allow unrestricted access to all IPs.
• Edit /etc/ssh/ssh_config for global configuration or ~/.ssh/config for user-specific configuration.

See http://linuxcommando.blogspot.com/2008/10/how-to-disable-ssh-host-key-checking.html

Similar question on superuser.com - see https://superuser.com/a/628801/55163

Make sure ~/.ssh/known_hosts is writable. That fixed it for me.

The best way to go about this is to use 'BatchMode' in addition to 'StrictHostKeyChecking'. This way, your script will accept a new hostname and write it to the known_hosts file, but won't require yes/no intervention.

ssh -o BatchMode=yes -o StrictHostKeyChecking=no [email protected] "uptime"

Edit your config file normally located at '~/.ssh/config', and at the beggining of the file, add the below lines

Host *
    User                   your_login_user
    StrictHostKeyChecking  no
    IdentityFile          ~/my_path/id_rsa.pub

User set to your_login_user says that this settings belongs to your_login_user
StrictHostKeyChecking set to no will avoid the prompt
IdentityFile is path to RSA key

This works for me and my scripts, good luck to you.

This warning is issued due the security features, do not disable this feature.

It's just displayed once.

If it still appears after second connection, the problem is probably in writing to the known_hosts file. In this case you'll also get the following message:

Failed to add the host to the list of known hosts 

You may fix it by changing owner of changing the permissions of the file to be writable by your user.

sudo chown -v $USER ~/.ssh/known_hosts

Ideally, you should create a self-managed certificate authority. Start with generating a key pair:

ssh-keygen -f cert_signer

Then sign each server's public host key:

ssh-keygen -s cert_signer -I cert_signer -h -n www.example.com -V +52w /etc/ssh/ssh_host_rsa_key.pub

This generates a signed public host key:

/etc/ssh/ssh_host_rsa_key-cert.pub

In /etc/ssh/sshd_config, point the HostCertificate to this file:

HostCertificate /etc/ssh/ssh_host_rsa_key-cert.pub

Restart the sshd service:

service sshd restart 

Then on the SSH client, add the following to ~/.ssh/known_hosts:

@cert-authority *.example.com ssh-rsa AAAAB3Nz...cYwy+1Y2u/

The above contains:

• @cert-authority
• The domain *.example.com
• The full contents of the public key cert_signer.pub

The cert_signer public key will trust any server whose public host key is signed by the cert_signer private key.

Although this requires a one-time configuration on the client side, you can trust multiple servers, including those that haven't been provisioned yet (as long as you sign each server, that is).

For more details, see this wiki page.

Do this -> chmod +w ~/.ssh/known_hosts. This adds write permission to the file at ~/.ssh/known_hosts. After that the remote host will be added to the known_hosts file when you connect to it the next time.

With reference to Cori's answer, I modified it and used below command, which is working. Without exit, remaining command was actually logging to remote machine, which I didn't want in script

ssh -o StrictHostKeyChecking=no user@ip_of_remote_machine "exit"

Add these to your /etc/ssh/ssh_config

Host *
UserKnownHostsFile=/dev/null
StrictHostKeyChecking=no

Generally this problem occurs when you are modifying the keys very oftenly. Based on the server it might take some time to update the new key that you have generated and pasted in the server. So after generating the key and pasting in the server, wait for 3 to 4 hours and then try. The problem should be solved. It happened with me.

The following steps are used to authenticate yourself to the host

1. Generate a ssh key. You will be asked to create a password for the key

ssh-keygen -f ~/.ssh/id_ecdsa -t ecdsa -b 521

(above uses the recommended encryption technique)

2. Copy the key over to the remote host

ssh-copy-id -i ~/.ssh/id_ecdsa user@host

N.B the user @ host will be different to you. You will need to type in the password for this server, not the keys password.

3. You can now login to the server securely and not get an error message.

ssh user@host

All source information is located here: ssh-keygen

Run this in host server it's premonition issue

chmod -R 700 ~/.ssh

I had the same error and wanted to draw attention to the fact that - as it just happened to me - you might just have wrong privileges.
You've set up your .ssh directory as either regular or root user and thus you need to be the correct user. When this error appeared, I was root but I configured .ssh as regular user. Exiting root fixed it.

This is trying to establish password-less authentication. So, if you try to run that command manually once, it will ask to provide the password there. After entering password, it saves that password permanently, and it will never ask again to type 'yes' or 'no'.

For me the reason is that I have wrong permission on ~/.ssh/known_hosts.

I have no write permission on known_hosts file. So it ask me again and again.

In my case, the host was unkown and instead of typing yes to the question are you sure you want to continue connecting(yes/no/[fingerprint])? I was just hitting enter .

I solve the issue which gives below written error:
Error:
The authenticity of host 'XXX.XXX.XXX' can't be established.
RSA key fingerprint is 09:6c:ef:cd:55:c4:4f:ss:5a:88:46:0a:a9:27:83:89.

Solution:

1. install any openSSH tool.
   
2. run command ssh
   
3. it will ask for do u add this host like. accept YES.
   
4. This host will add in the known host list.
   
5. Now you are able to connect with this host.
   

This solution is working now......